What is Aerogel?
Aerogel is a broad term used to talk about an extraordinary group of materials that have been used since the 1960s in space travel, but are now finding uses across a whole range of industries. ‘Aerogel’ is not a specific mineral or material with a set chemical formula-rather, the term is used to encompass all materials with a specific geometrical structure. This structure is an extremely porous, solid foam, with high connectivity between branched structures of a few nanometres across.
Though aerogel is technically a foam, it can take many different shapes and forms. The majority of aerogel is composed of silica, but carbon, iron oxide, organic polymers, semiconductor nanostructures, gold and copper can also form aerogel. However, within the aerogel structure, very little is solid material, with up to 99.8% of the structure consisting of nothing but air. This unique composition gives aerogel an almost ghostly appearance; hence it is often referred to as ‘frozen smoke’.
Applications of Aerogel
As aerogel has such diverse chemical and physical properties, it is no surprise that it also has a wide range of applications. Since the 1960’s, aerogel has been used as the insulating material in spacesuits of NASA astronauts as, despite its wispy appearance, it is extremely strong and can survive take-off conditions easily.
In the early 21st century, aerogel was employed in a very special role by NASA- to capture space dust. Aerogel is being used in conjunction with the ‘Stardust’ mission, which aims to bring back particles from space from beyond the Moon for the first time. This dust is being primarily collected from the comet ‘Wild 2’. Aerogel is being used to capture this comet dust, as it will be able to trap the small particles without physically altering them. When the particle hits the aerogel, it will be traveling at speeds of up to 6 times that of a rifle bullet, which means most substances would not be able to slow the dust down without heating and thus alteration taking place. With aerogel, however, the dust buries itself into the porous material and is gradually brought to a stop as it loses momentum.
ABOUT THE DIFFERENCE
Silica Aerogel Insulation Blanket are the least dense solid in the world today. Pyrogel Aerogel insulation blanket have low thermal conductivity, high temperature resistance, flame retardancy, low density, and also have certain waterproof effect.
Silica aerogel insulation blanket is the best thermal insulation blanket material so far, its pore size is lower than the atmospheric pressure under normal pressure, so the air molecules in aerogel gap are in a static state, thus avoiding the convection heat transfer of the air. The very low volume density of the Silica Aerogel Insulation and the bending path of the nanoscale structure also prevent the gas and solid heat conduction, and the “infinitely many” void walls can minimize the thermal radiation. Together, these three functions almost blocked all the ways of heat transfer, which is the adiabatic effect of aerogels to other materials.
1st advantage is Excellent heat insulation effect
The heat insulation effect of Silica Aerogel Insulation Felt is 2-5 times that of traditional insulation material, and the theoretical lifetime measured by Arrhenius experiment is 20 years. It’s almost the same life as the building.
2, reduce the thickness of insulation layer
The aerogel felt has the same thermal insulation effect and the thickness is only a fraction of the traditional material. After heat preservation, the heat loss is small and the utilization rate of space is high. And at high temperatures, the above performance advantages are more obvious.
3, hydrophobicity and fire resistance
Aerogel blanket water repellent, which can effectively prevent moisture from entering pipes and equipment. At the same time, it has the fireproof performance of the building A1, and the three-dimensional network structure of the aerogel avoids the heat insulation effect of other thermal insulation materials in the long-term high temperature use, such as sinter deformation, settlement and so on.
4. Convenient construction
The aerogel blanket is light, easy to cut and sewn to adapt to various forms of pipes and equipment for thermal insulation, and the installation time and manpower are less.
5, save transportation cost
Aerogels can be used in an environment of -200~650 degrees Celsius, but it is usually used in aerogel insulation blanket. Based on the fiber’s fire resistance temperature, in principle we will control the temperature of 200 degrees Celsius. The hot melt adhesive used for aluminum foil or cloth and insulation blanket will not melt and ensure normal use. Of course, we keep insulation on the exterior wall. Aerogel insulation will also be done when other fixed, plate, screw and so on will be used.
There will be other conditions in the aerogel insulation blanket in
21 total views, 1 today